How to Fix Your Washing Machine Not Draining Water

If your washing machine isn’t draining water, there are a few things you can try to fix the problem. First, check for clogs in the drain hose and drain pipe. If you find a clog, make sure the hose is connected at the correct height and push it at least 15cm into the drain outlet. If you’ve tried all of these things and still have not been able to get the water draining properly, you’ll need to call an Authorised Service Agent for further investigation.

What causes washing machine not to drain and spin?

There are a few reasons why a washing machine may not drain and spin properly. First, it could be that the lid switch is broken or faulty. The lid switch is a simple piece of hardware that detects when the lid is open or closed. The lid switch prevents the washing machine from spinning, which could be harmful.

Sometimes, a broken lid switch is the primary culprit. This part of the washing machine prevents it from spinning when the lid is open, so when the lid is open, the machine does not drain. This can cause the water to back up and the water is left in the washing machine. To repair the lid switch, remove the back access panel on the washing machine and remove the drain pump. If this step does not fix the problem, you’ll have to replace the pump. Another possible cause is a worn drive belt. The drive belt is located at the bottom of the machine.

Another possible cause of a washing machine not spinning and draining is a clogged drain hose or pump. These two components are relatively cheap and easy to replace. In addition to a defective lid switch, a clogged drain hose or pump could also cause the problem.

4 Reasons Your Washing Machine Won’t Drain or Spin

If your washing machine won’t spin or drain, there are a few possible causes. Some are easy to fix, like incorrect loading or a clogged drain hose. Others may require the help of a repair expert. In these cases, the first step is to locate the problem and take action.

First, check the drain trap. This part is normally located at the front bottom of your washer. It has a cutout section where you can access the drain trap cap. Once you’ve reached the drain trap, you’ll need to remove the cap and turn it counterclockwise to drain water and debris. Be sure to clean out the lint trap as well. Once this step has been completed, your washer should spin again.

In older washing machines, sediment and debris can build up inside the drain hose. If this happens, you may need to remove the front panel to access the pump. You should also inspect the filter inside the pump for any obstruction. If you find any, remove the clog with a long object.

Troubleshoot top-load washer won’t drain or spin

If your top-load washer won’t spin or drain properly, try to diagnose the cause. Sometimes, a clogged drain hose is the culprit. This hose is attached to a drain pump and can become clogged if it is frozen or kinked. It can also become clogged if clothes become stuck inside. If you see this problem, you should remove the hose and manually drain the washer.

The drain hose is an important part of the washer. This hose is what carries dirty water away from the machine when it drains. It should be connected to a nearby drain. Sometimes, this hose can become twisted or clogged inside the machine. If the problem persists, call a plumber for repairs.

Another problem that can prevent a washer from spinning or draining is a clogged drain pump. If this pump stops working, the water will collect in the washing machine’s drain bucket and will not drain. If this problem persists, replace the drain pump. A bad pump can cause your top-load washer to stop draining properly.

Check for clogs in the drain hose and drain pipe

If the washing machine is not draining water, it is important to check for clogs in these areas. These clogs can be in the drain hose or the drain pipe. Generally, these clogs are not too far down the drain pipe. However, if the clog is deeper, you should use a plumber’s snake to clear it.

Before you try to fix a clogged drain, you should check the drain hose and drain pipe for any kinks or twists. Make sure that the drain hose is not fully blocked, otherwise, the drain may overflow. Also, if the drain hose is kinked, use a flashlight to see whether there are any foreign objects trapped inside.

In case the hose is blocked, you can try to flush the drain with water and spray it into the clog. If it does not work, you can always hire a plumber to fix the issue.

Check the top-load washer drain pump

A clogged drain pump can keep your washing machine from draining water. This will cause water to back up and overflow into a bucket. To clear a clogged drain pump, you must disengage the hose from the pump and remove it. If you are unable to reach the drain pump, you can call a plumber or an appliance store to replace it.

If the pump is not functioning properly, check the drain hose and the hose connection. It may be clogged with a small object or damaged or obstructed. Remove the access panel on the back and pull the washing machine away from the wall to access the pump. In some cases, a worn or dirty drive belt may be to blame. If this is the case, remove the hose and look for clogs at the drain hose.

If you’ve tried everything else and your washing machine still doesn’t drain water, the pump could be blocked with a foreign object. A clogged pump can also make the washing machine make a clicking noise or a humming or buzzing noise. In that case, you need to replace the pump.

How do you clean a top load washing machine filter?

If your top load washing machine filter is not draining water, you may need to clean it. First, you need to remove the dirty lint and debris from the filter. Next, you need to fill the basin with hot water. Pour in the detergent solution and let the filter soak for at least 10 minutes. Scrub it until it is free of all gunk and debris.

You can also check the lint filter in the washer. It may be blocked with lint, and you will need to clean it regularly. You can also use a damp cloth to wipe it off. If the filter is clogged with lint, it is best to replace it with a new one. It can decrease the efficiency of your washer.

Another cause of a top load washing machine not draining water is a blocked drain pump filter. The filter collects lint and thread, and when it becomes clogged, it prevents the water from draining. In some models, such as Electrolux, the filter is located behind a small panel on the bottom right of the machine. To access the filter, you can remove it with a flathead screwdriver. Make sure to wipe a cloth down before opening the filter.

Test the washing machine lid switch

If your washing machine does not drain water, the problem may be caused by a faulty lid switch. This switch prevents the motor circuit from running when the lid is opened. If the lid switch lever is damaged or broken, you may have to replace it. Another possible cause of your washer not draining water is a faulty belt.

Ensure that the lid switch is in the “closed” position before replacing it. It is often located on the top of the machine. This switch is responsible for making the lid open and closing. However, it does not always work correctly. The switch must be tested using a multimeter to check for continuity. You can also check the motor coupling, which connects the motor to the transmission.

The lid switch is a safety feature found in most top-loading washing machines. It detects whether the lid is closed and prevents the washer from spinning when the lid is open. This safety feature prevents serious injuries. If the lid switch is broken, the washing machine will not be able to operate. Some models also use a magnetic lid switch.

These are the most popular cities we service in Barrow County Community Service Area:

Auburn, Statham, Russell, Bethlehem, Winder, Braselton, Carl


Tap to CALL